Isolation Factory Capabilities |
|||||||
3D Systems Ipro 9000 (SLA) | |||||||
Material | Appearance | Tensile Strength | longation at Break (% | Heat Deflection | Hardness | Layer resolution | Special Notes |
Accura 25 | Beige | 5,540-5,570 PSI | 13-20% | 136-145 F | 80 Shore D | 0.004 | |
Accura 60 | Clear | 8,410-9,860 PSI | 5-13% | 127-131 F | 86 Shore D | 0.004 | |
3D Systems HiQ Sinterstation (SLS) | |||||||
Material | Appearance | Tensile Strength | longation at Break (% | Heat Deflection | Hardness | Layer resolution | Special Notes |
Duraform PA (Nylon) | Yellow-White | 6,237 PSI | 14% | 356 F | 73 Shore D | 0.006 | |
Duraform GF (Glass-Filled Nylon) | White-Grey | 3,916 PSI | 1.40% | 354 F | 77 Shore D | 0.006 | |
Laserform A6 (A6 Tool Steel) | Bronze | 88 kSI | 2-4% | 10-20 HRc | 0.006 | ||
3D Systems Sinterstation Pro 230 (SLS) | |||||||
Material | Appearance | Tensile Strength | Elongation at Break | Heat Deflection | Hardness | Layer resolution | Special Notes |
Duraform PA (Nylon) | Yellow-White | 6,237 PSI | 14% | 356 F | 73 Shore D | 0.006 | |
3D Systems ProX 300 (DMLS) | |||||||
Material | Appearance | Tensile Strength | Elongation at Break | Heat Deflection | Hardness | Layer resolution | Special Notes |
17-4 Stainless Steel | Metallic Grey | 28-32 Hrc | 0.0015 | ||||
Stratasys Fortus 900mc (FDM) | |||||||
Material | Appearance | Tensile Strength | Elongation at Break | Heat Deflection | Hardness | Layer resolution | Special Notes |
ABS | Ivory-Black | 5,200 PSI | 4% | 204 F | R 109.5 | .007-.013 | |
Poly-carbonate | White | 9,800 PSI | 5% | 280 F | R 115 | .007-.013 | |
PC-ABS | Black | 5,900 PSI | 6% | 230 F | R 110 | .007-.013 | |
Nylon 12 | Black | 7,000 PSI | 30% | 206.6 F | .007-.013 | Fatigue Resistant | |
PPSF | Tan | 8,000 PSI | 3% | 372 F | M86 | .007-.013 | Highest Heat and Chemical Resistance |
Ultem 9085 | Tan | 10,400 PSI | 6% | 307 F | .007-.013 | FST Certified Material (Fire, Smoke, and Toxicity Resistant) |
Stratasys Connex 500 Rigid Materials | |||||||
Materials | Appearance | Tensile Strength | Elongation at Break | Heat Deflection | Water Absorption % | Layer resolution | Special Notes |
VeroWhite Plus | White | 7,250-9,450 PSI | 15-25% | 113-122 F | 1.1-1.5% | 0.001 | Combining these two materials yields different shadesof gray |
VeroBlack Plus | Black | 7,250-9,450 PSI | 15-25% | 113-122 F | 1.1-1.5% | 0.001 | |
Vero Blue | Blue | 7250-8700 PSI | 15-25% | 113-122 F | 1.5-2.2% | 0.001 | |
Vero Gray | Gray | 7,250-9,450 PSI | 15-25% | 113-122 F | 1.1-1.5% | 0.001 | |
Endur RGD 450 | White | 5800-6500 PSI | 20-35% | 120-129 F | 0.001 | ||
DurusWhite | Frosted Clear | 2900-4350 PSI | 40-50% | 99-108 F | 1.5-1.9% | 0.001 | Objet’s Original PP-Like Material (Replaced by Endur for most applications) |
VeroClear | Clear | 7,250-9,450 PSI | 10-25% | 113-122 F | 1.1-1.5% | 0.001 | |
RGD 720 | Amber-Clear | 7250-9450 PSI | 15-25% | 113-122 F | 1.5-2.2% | 0.001 | |
RGD 525 | Ivory | 0,000-11,500 PSI | 10-15% | 167-176 F | 1.2-1.4 % | 0.001 | High Temperature Plastic |
ABS-Like | Green/Beige | 8,000-8,700 PSI | 25-40% | 198-203 F | Not for use in water | 0.001 | PolyJet’s highest possible impact resistance and shock absorption |
Med610 | Clear | 0.001 | Suited for on-skin medical devices (i.e. Hearing Aids) orTemporary Orthodontic Applications | ||||
Stratasys Connex 500 Rubber-Like Materials | |||||||
Materials | Appearance | Tensile Strength | Elongation at Break | Shore Hardness | Layer resolution | Special Notes | |
Tango Plus | Yellow-Clear | 115-220 PSI | 170-220% | 26-28 Shore A | 0.001 | Combining these materials with a rigid plastic can yield the following Shore A Values: 35-40, 45-50, 57-63, 68-72, 80-85, and 92-95. Or a Rigid Polypropylene-like | |
Tango Black Plus | Black | 115-220 PSI | 170-220% | 26-28 Shore A | 0.001 | ||
Tango Black | Black | 115-350 PSI | 45-55% | 60-62 Shore A | 0.001 | Combining with a rigid plastic can yield 75-85, 80-90, and 90-100 Shore A Values | |
Tango Gray | Grey | 435-725 PSI | 45-55% | 73-77 Shore A | 0.001 |